Kontron CG2100 Carrier Grade Server - Manual (Page 13)

12
Table 2. CG2100 Carrier Grade Server Components
Item Description Item Description
A SD flash modules K PCI riser options: 3x
PCIe, 5x PCIe butterfly,
or 2x PCI-X +3x PCIe
butterfly
B RJ45 COM2 port and USB
port (2 connectors) L Rear I/O modules
C Control panel and
status/alarm indicators M Intel server board
T5520UR (baseboard)
D SAS or SATA hard disk
drives (up to six) N DDR3 memory DIMM sockets
(CPU 1 DIMM slots shown)
E Power distribution board
and SAS/SATA module
location O Two CPUs (CPU 1 shown)
F Power distribution board
(PDB) P DDR3 memory DIMM sockets
(CPU 2 DIMM slots shown)
G SAS/SATA control module
or SAS/SATA RAID module Q System fans
H Power supply cage for
two power supply modules R Front panel board with
optional SD flash module
and TAM module
I Redundant hot-swappable
power supply modules S LED/switch board and
telco alarm LEDs
J Riser card assembly
(containing both full-
height and low-profile
riser cards
2.2 CG2100 Server Front Panel
Figure 3 shows the front panel of the CG2100 server with the bezel installed.
Figure 3. CG2100 Server Front View (Bezel Installed)