Kontron CG2100 Carrier Grade Server - Manual (Page 19)

18
2.10 Ethernet NIC Ports
The CG2100 server has two GbE NIC ports mounted on the baseboard that are accessible
from the rear of the chassis. Additional rear-accessible GbE NIC ports can be added
to the system by using
• Full-height PCI-X/PCIe add-in cards or low-profile PCIe add-in cards
• Personality module slots accessible from the rear of the chassis
The GbE personality card options are:
• Dual-port 10GbE I/O module
• Quad-port GbE I/O module
2.11 Remote Management Module 3
RMM3 is implemented on the iBMC on the server board. To use this feature, a
separately-orderable GCM4 NIC module must be installed.
2.12 Power Supply Subsystem
The power supply subsystem consists of up to two AC or DC power supply modules (two
needed for redundancy) and a power distribution board (PDB). One power supply module
is included with the server with a filler panel in the second power supply slot.
The power supply module is rated for 600W output capability in full AC or DC input
voltage range. The minimum steady-state DC input voltage at which the equipment
remains fully operational is -38 VDC. The nominal operating voltage of the DC system
is -48 VDC.