Kontron CG2100 Carrier Grade Server - Manual (Page 18)

17
ITEM Description ITEM Description
A 280-pin Intel® adaptive
riser card slot
N Fan header
B POST code LEDs O Bridge board connector
C GCM4 NIC connector P Main power connector
D CPU1 Q Power Supply SMBus connector
E Rear panel I/O R USB header
F System status LED S Low-profile USB solid-state
drive header
G ID LED T Fan header
H Fan header U LCP IPMB header
I Fan header V Serial port COM2 connector
J CPU1 DIMM slots W Personality module connector
K CPU2 DIMM slots X Personality module connector
L CPU2 Y Internal USB header
M Fan header
2.9 Riser Card Assembly
The CG2100 server has a PCI riser assembly that supports the installation of both PCI-
X and PCI Express* add-in cards. There are three riser card options that can each use
the super slot on the T5520UR server board (the baseboard).
Once PCI add-in cards are installed and the riser card assembly is remounted in the
chassis, the cards are accessible from the rear of the server chassis. There are two
slots for low profile PCIe add-in cards and three slots for full-length PCI-X/PCIe
add-in cards.
Figure 8 shows the possible PCI card configurations with the different riser card
options.
Figure 8. Riser Card Configuration Options