Rice Lake iQUBE2 Digital Diagnostic Junction Box - Manual (Page 57)

Data Formatting 53
7.0 Data Formatting
7.1 Weight Data Formats
The following data formats are available for the iQUBE 2 : Each of the listed formats can be customized to suit the
application. The length of a format string is limited by the length of a serial input value at 128 characters.
7.1.1 Data Format Tokens
Table 7-2. Data Format Tokens
Identifier Default Format
FMT1 (default gross format) Scale<SC>:<CR><LF>Gross<TAB><G><CR><LF>
FMT2 (default net format) Scale<SC>:<CR><LF>Gross<TAB><G><CR><LF>Net<TAB><N><CR><LF>
Tare<TAB><T><CR><LF>
FMT3 (default polling format) <SC><POL><W7.><T7.><UNIT><G/N><S><D>
FMT4 (default streaming format) <STX><POL><W7.><UNIT><G/N><S><CR><LF>
FMT5 <SC><POL><W7.><UNIT><G/N><S> | <T7.> |
FMT6 <SC><POL><W7.><UNIT><G/N><S><D> DIO:<DIO><CR><LF>
Table 7-1. iQUBE 2 Data Formats
Token Description
<CN> Consecutive number
DO NOT USE FOR STREAMING/POLLING
<CR> Carriage return character
<D> Diagnostic event flag character (see Table 7-4
on page 54)
<DA> Date
DO NOT USE FOR STREAMING/POLLING
<ETX> End of text character
<G> Gross weight, primary units
<G/A> Gross weight, secondary units
DO NOT USE FOR STREAMING/POLLING
<G/N> Weighing mode (gross or net)
<LF> Line feed character
<N> Net weight, primary units
<N/A> Net weight, secondary units
DO NOT USE FOR STREAMING/POLLING
<NL> New line character
<NLnn> New line characters (1–99)
<POL> Weight polarity
<S> Status flag (see Table 7-3 on page 54)
<SCn> Scale number (1–5)
<SP> Space character
<SPnn> Space characters (1–99)
<STX> Start of text character
<SU> Toggle weight data format (formatted/
unformatted)
<T> Tare weight, primary units
<T/A> Tare weight, secondary units
DO NOT USE FOR STREAMING/POLLING
<T5.> Tare weight, 5-digit width
<T6.> Tare weight, 6-digit width
<T7.> Tare weight, 7-digit width
<T8.> Tare weight, 8-digit width
<TAB> Tab character
<TABnn> Tab characters (1–99)
<TD> Time and date
DO NOT USE FOR STREAMING/POLLING
<TI> Time
DO NOT USE FOR STREAMING/POLLING
<UNIT> Weight unit character (see Table 7-3)
<W5.> Weight, 5-digit width
<W6.> Weight, 6-digit width
<W7.> Weight, 7-digit width
<W8.> Weight, 8-digit width
<nnn> ASCII character code
Token Description