9 program store, To exit or cancel program store – Yamaha FX770 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Section 4; The Edit Mode
4.9 PROGRAM STORE
The Program Store Mode is used to save any edit(s) or changes you have made to the currently selected Program. This Mode
may also be used to move or relocate a Program to a new location. The Program Store Mode may be exited at any time by
pressing any of the [EFFECT SELECT] buttons or the [PLAY], [EDIT], [UTILITY] or [BYPASS] keys.
The Program Store display on the LCD contains the following information:
1. Press the [STORE] key to enter the Program Store Mode.
.Jersadr i ye
iTORE OK ?-
Store Location
STORE OK?
The Store Location contains the name of the Program that will be overwritten by the currently edited Program to
be stored.
The PROGRAM NUMBER LED shows the number of the Program that will be overwritten by the currently edited
Program to be stored.
The EFFECT SELECT LED shows the setting of the Program that will be overwritten when the program currently
being edited is stored.
2. Use the [DATA WHEEL] to select the USER Program location that you wish to Store the current edit(s).
P i zazz
5T0RE OK
3. Press the [STORE] key again to complete this process. The LCD display will flash a confirmation message like
the sample below for a few seconds, then Play mode will be selected.
PROeRflM STORE
PI UZ0
To Exit or Cancel Program Store
The Program Store Mode may be exited at any time by pressing any of the [EFFECT SELECT] buttons or the
[PLAY], [EDIT], [UTILITY] or [BYPASS] keys.
22