1 compressor/limiter, Type 1 & 2: col (compressor 1), c02 (compressor 2), Type 3 lim (limiter) – Yamaha FX770 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Section 7: Reference
7.1.1 COMPRESSOR/LIMITER
From the days of the “stomp box” pedal effects to the current use of rack mount devices, the Compressor has been
a vital tool for the guitarist. The FX770 features a classic Compressor designed especially for guitar (just like your
favorite “stomp box”), and a modem Limiter to fill your contemporary “rack mount” sound needs.
Type 1 & 2: COl (compressor 1), C02 (Compressor 2)
Compressor C02 has a much deeper effect than the COl.
Page 1
COx flTK SUS LUL
Parameter #
Name
Function
Value/Range
Parameter 1
Parameter 2
Parameters
Notes:
Attack Time
Sustain
Output Level
ATK
SUS
LVL
Attack Time
Sustain
Output level
0~20
0 - 1 0 0
-cc, -30 - +6 [dB]
Determines how long it takes for compression to begin after an input signal is detected.
A higher value emphasizes the attack.
Determines how long it takes for the compression to be released after the input signal drops.
Balances out the volume level when the Compressor/Limiter Effect Block is being used. (Set this level
carefully! Usually, try to set the Volume level of the Comp/Lim effect block to be the same whether the effect
is in or out of the signal chain) . However, another technique is to raise the level here so that distortion will
be more effective.
Type 3 LIM (Limiter)
Paget
LIM FlTK SUS LUL
Parameter
#
Name
Function
Value/Range
Parameter 1
Parameter 2
Parameter 3
Notes:
Attack Time
Sustain
Output Level
ATK
SUS
LVL
Attack Time
Sustain
Output level
0 - 2 0
0 - 1 0 0
-=o, -30 - +6 [dB]
Determines how long it takes for compression to begin after an input signal is detected.
A higher value emphasizes the attack.
Determines how long it takes for the compression to be released after the input signal drops.
Balances out the volume level when the Compressor/Limiter Effect Block is being used. (Set this level
carefully! Usually, volume should be Volume should be set to be the same when CMP/LIM is in or out) in
or out). However, another technique is to raise the level here so that distortion will be more effective.
36