Tempo modulation delay, Type 6: tmd (tempo modulation delay) – Yamaha FX770 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Section 7: Reference
Mix Balance
Output Level
Trigger
Left/Right Balance
High Freq. Ratio
Mixes between the Dry signal and the Delay effect (Setting this to 100% will produce only the chorus
effect.)
Overall Level of this Effect Block
Selects the Source of external control for the Tempo parameter. You can adjust the TEMPO parameter
value using the footswitch (by selecting FS2) or using the MIDI clock (by selecting MIDI).
Adjusts the pan position of the Delay effect if it is unbalanced due to a high DEF parameter value.
A “tape-echo” EQ for the delays. As the value increases, the high range of the repeated sound
attenuates gradually, resulting in a very natural echo.
NOTEL
r-O-
Lch Delay Time
NOTER
H>- -► Rch Delay Time
NOTEF
I
TEMPO
h#
—---------------- ► Feedback Delay Time
i-TRG-
■ OFF
(OFF)
■TapTempo
(FS2)
-MIDI Clock (MIDI)
Tempo Modulation Delay
Same as the Modulation Delay (MDL) with the addition of Tempo control.
Type 6: TMD (Tempo Modulation Delay)
Page 1
Page 2
Pages
Page 4
TMD TEMPO NOTE
TMD FB SPD DEP
TMD MIN LOL
TMD TRG HF
57