Hardy HI 6600 Series Modular Sensor System - Manual (Page 106)

HI 6600 Series Modular Sensor System User Guide
Page | 106
Tests and Diagnostics
The Test and Diagnostics menus provide an expanded view of how the weight processor and scale are working. You can
run several tests from either the test links on the Web Diagnostic page or the Optional Front Panel Test menu. Each test is
described in its own subsection below.
You can also obtain information that a Hardy representative may ask for if you make a request to Technical Support. For
example, for the last calibration, you can see the type of calibration and when it was done. You can also check the
graduation size, operator ID, and other configuration information, and you can learn the serial number, model number,
firmware revision number.
Diagnostic testing from the Optional Front Panel
From the Configuration menu, use the down arrow to select Diagnostics and press Enter to open the Menu.
This menu lists the tests you can run.
Use the down arrow to select the option.
NOTES The values entered in the Diagnostics Menu are for illustration purposes only. Your values will vary.
To download the latest firmware version, see the HI 6600/Downloads page at:
http://www.hardysolutions.com/products/weighing-instruments/weight-
processors/product/461/hi-6600-series