Hardy HI 6600 Series Modular Sensor System - Manual (Page 73)

HI 6600 Series Modular Sensor System User Guide
Page | 73
USB Memory Stick
The HI 6600 series provides an interface to an external USB memory stick that allows HI 6600 parameters to
be saved, restored or copied to another instrument.
The USB memory stick commands can be activated through the web interface or the display panel.
From the front keypad: To access the USB Menu, select Configuration > Enter, Communications > Enter,
USB >Enter, UP or DOWN arrow to Save or Restore > Enter.
On the Web page: Select Configuration, Communications, USB, then Save or Restore.
1) Insert the USB stick into the HI 6600 series HGM.
2) Using the web interface or display panel, save or restore system parameters.
Restore Command
This command replaces the existing HI 6600 series parameters by the parameters stored on a USB memory
stick.
On the HI 6110 optional display: Select the Communication menu and use the UP or DOWN button to select the
USB submenu, then select the Restore menu item then press the ENTER button.
Save Command
This command saves the current HI 6600 parameters to a USB memory stick.
On the HI 6110 optional display, select the Communication menu and use the UP or DOWN button to select
the USB submenu, then select the Save menu item then press the ENTER button.