Hardy HI 6600 Series Modular Sensor System - Manual (Page 14)

HI 6600 Series Modular Sensor System User Guide
Page | 14
Each Hardy Process Solutions C2-certified load sensor outputs digital information used for calculating the calibration.
When the HI 6600 series instrument reads the signals from the load sensors, it calibrates the scale based on the load
sensor’s output plus a user-supplied reference point value (from 0 to any known weight on the scale).
INTEGRATED TECHNICIAN ®
In conjunction with an IT junction box, the HI 6600 series features INTEGRATED TECHNICIAN® (IT), a system
diagnostics program that makes it possible to diagnose weighing system problems from Hardy’s Web Server or a
connected optional display panel. IT reads individual load sensor voltages and weights and isolates individual system
components for quick and easy troubleshooting
NOTE: If you do not have a Hardy IT Junction Box connected to the HI 6600, the weight reading is the total for all load cells
on the system.
WAVERSAVER
®
When measuring small weight changes, the effects of mechanical vibration and noise from feeders and other plant
environmental conditions can introduce substantial interference. WAVERSAVER factors out vibration, noise, and other
interference-related signals from the load cell so the weight processor can better decipher the actual weight data.
While WAVERSAVER can factor out noise with frequencies as low as 0.25 Hz, five cut-off frequencies can be selected,
with higher frequencies providing a faster response time. The default factory setting is 1.00 Hz vibration frequency
immunity.
C2, INTEGRATED TECHNICIAN and WAVERSAVER are registered trademarks of Hardy Process Solutions.