Hardy HI 6600 Series Modular Sensor System - Manual (Page 15)

HI 6600 Series Modular Sensor System User Guide
Page | 15
Chapter 3
HI 6600 Hardware Installation
• • • • • •
Chapter 3 covers physical installation of HI 6600 Modular Sensor System. User and service personnel should read this
chapter before installing or operating the HI 6600 Modular Sensor System.
Safety
Before you begin installing your HI 6600 series equipment, please review the important safety precautions
below.
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in this
Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Hardy Process Solutions
provides manuals in PDF format that are easily downloaded from our website, free of charge. Look under the Docs &
Programs tab on the web page for each product.
General Precautions
 Always disconnect the power cord before disassembling.
 Always replace broken or damaged modules or hardware immediately.
 Always check to be sure that no loose parts are sitting on printed circuit boards or electrical connectors or wires
when disassembling or reassembling.
 Always protect printed circuit boards from electrostatic discharge (ESD). Always use approved ESD wrist straps
and anti-static pads.
Unpacking
1) Before signing the packing slip, inspect the packaging for damage, and report damage of any kind to the carrier
company.
AVERTISSEMENT – Risque d’explosion – Ne pas débrancher l’équipement à
moins que l’alimentation soit coupée ou que la zone ne présente pas de risques
WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT
UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE
NON-HAZARDOUS
AVERTISSEMENT – Risque d’explosion – La substitution de composants peut
diminuer la conformité pour la Division 2
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY
IMPAIR SUITABILITY FOR DIVISION 2.