Hardy HI 6600 Series Modular Sensor System - Manual (Page 45)

HI 6600 Series Modular Sensor System User Guide
Page | 45
Zero Amount
The Zero Amount parameter is READ ONLY and displays the amount that has been "zeroed" from the scale.
On the Web page or Using the Optional Front Panel Display: Enter the Zero Amount on the Operations Menu web
page or enter the Zero Amount using the arrow keys on the operations menu on the front panel.
Zero Command
On the Web page: click the Zero button to zero the scale. When the Zero command is selected the Gross weight value is
set equal to 0 (zero) if the Gross weight is within the Zero tolerance, and the displayed weight will show 0.00 while in
Gross mode.
Using the Front Panel Display: momentarily press the Zero button to Zero the scale.
NOTE The Zero Command will fail if the scale is in motion
Auto Mode
Auto Mode enables one-button functionality when performing Zero and Tare operations, automatically switching to Net
mode when Tare is pressed. The default is Disabled. The reason you may want to use Auto Mode is when the scale is in
constant operation and there isn’t time to switch modes between weigh operations.
On the Web page: select the Operations menu and left click to pull down the Enabled/Disabled command to select Auto
mode.
Using the Front Panel Display: select either Enable or Disable then press ENTER to execute the command.