Hardy HI 6600 Series Modular Sensor System - Manual (Page 17)

HI 6600 Series Modular Sensor System User Guide
Page | 17
Overview of the HI 6600 Hardware
Before installing the HI 6600 Series, familiarize yourself with the basic configuration as shown below.
DC Power, Shield, Ports for HardyNet and a Termination switch can be found on the bottom of both the Hardy Gateway
Module and the Weight Processing Modules.
The RJ45 ports located on the bottom are used to connect the system using Cat5e cabling. Communications between
modules (HardyNet) as well as power distributed from the Gateway Module to the Weight Processing Modules is carried
on the Cat5e cabling.
Weight Processing Module Hardy Gateway Module
The Weigh Scale Input is located on the front of the HI 6610 Weight Processing Module.
Located on the front of the HI 6600 Gateway module is a USB port (used to store system settings), a Display
port (for connecting to an optional HI 6110 display), Serial Termination switch, Serial Port and an Ethernet Port.
Installation
The HI 6600 Series WPMs and HGMs are designed to be installed on a DIN rail as shown below.