Hardy HI 6600 Series Modular Sensor System - Manual (Page 82)

HI 6600 Series Modular Sensor System User Guide
Page | 82
Modifying the Security Parameters
To view or modify the security parameters use the UP or DOWN button to select the security menu then press ENTER.
Figure 5: Parameters Lock Flow Chart
To modify the security feature use the UP or DOWN button to select the security feature then press the ENTER button.
The password dialog box will appear; if the correct 4 alphanumeric character sequence is entered the operator will be able
to either enable or disable the security feature or change the password. Note a password must consist of a 4 alphanumeric
character sequence to be accepted as a valid password.
If an incorrect password is entered the menu will be returned to the security submenu.
The updated security features for the Read Only Lock and Calibration Lock will not be active until the operator leaves the
security menu, any changes for the Configuration Lock, Keypad Lock, or Display Lock will not be active until the
operator exits the configuration menu and returns to the top level display.