Canon SX 50 - Manual (Page 18)

Projector User Commands
- 12 -
Revision History / Date Changes Revised by Approved by
Mode
Item
LOCAL mode REMOTE mode
Commands supported
For the SX50
Command/parameter Remarks
REMOTE
LOCAL
GET MODE
MAIN
RC
For the SX6/SX60/X600/SX7/X700
Command/parameter Remarks
GET COMVER
GET ERROR
GET FREEZE
GET INPUT
GET LAMPCOUNTER
GET MODE
GET MUTE
GET NOSHOWSTATUS
GET POWER
GET PRODCODE
GET ROMVER
GET SIGNALSTATUS
LOCAL
MAIN
RC
REMOTE
For the SX7 Mark II: All commands
All commands except for "RC" and "MAIN"
Special mode
(Service mode) Executable with remote control or main unit
buttons
Not executable in any state
*1 However, switching to the USB mouse function or Special mode is not allowed.
*2 If the control mode is REMOTE, the following are displayed regardless of whether the power is on or off.
*3 When the power management setting is "standby" or "exit"
LED indicator pattern during REMOTE mode