Overview, Projector user commands – Canon SX 50 User Manual
Page 7
Advertising
Projector User Commands
- 1 -
Revision History / Date
Changes
Revised by
Approved by
1. Overview
These specifications describe the methods of controlling the projector from the PC over an RS-232C connection.
Virtually all operations possible with the remote control can be controlled from the PC.
The following symbols are used in these specifications:
Symbol
Description
△
Space
with
0
or more characters (20h), Tab (09h), or other separator.
□
Space with 1 or more characters (20h), Tab (09h), or other separator.
▽
Separator between parameters △ , △ | □.
[ ]
Data in [ ] can be omitted.
|
Same as OR.
:=
Definition name is on the left side of this mark, and definition description is on the right side.
Advertising