Error message report, Error message report -15 – Xerox 7024 User Manual
Page 115
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REPORTS
Error message report
The terminal automatically prints out this report when it
encounters one of the following problems:
•
Power is removed from the terminal. All jobs in memory to
be transmitted or polled are erased.
•
Memory fills while scanning a document if operator fails to
respond.
•
A job is pending.
•
The document is removed from the tray while the terminal is
waiting to redial.
One of the following messages will be printed on the report:
THIS COMMAND WAS NOT STORED, MEMORY FULL WITH NO
OPERATOR RESPONSE or THIS COMMAND WAS ERASED.
The header of the report contains the local name, local I.D. and
current date and time.
DESCRIPTION OF ERROR MESSAGE REPORT
COLUMN TITLE
COLUMN DESCRIPTION
NO.
Job number
REMOTE STATION
Number of the one touch dial, speed dial or programmable one
touch dial key used or number entered from the keypad.
START
Start time for the delayed send operation.
NOTE
DELAYED SEND
DELAYED GROUP SEND
SEND SECURE MAIL
NUMBER
RELAY SEND
TERM:
COPY TO RELAY
DELAYED POLLING
Regular transmission
Broadcast transmission
Secure mail
Mailbox number
Relay send
Destination terminal
Relay printout
Polled operation
ERROR MESSAGE REPORT
NO.
REMOTE STATION
START
NOTE
1
[01],
105]
12,14:07
DELAYED GROUPSEND
SOOO
2
[P11
06,01:18
SEND SECURE MAIL
MAILBOX NUMBER: 02
S010
3
(01)
06,01:18
RELAY SEND
TERM.:01,5*,#2,’**,99
COPY TO RELAY
soil
TELECOPIER 7024 USER HANDBOOK
6-15