Set polled mode, To set polled mode (menu 09, feature 01), Set polled mode -9 – Xerox 7024 User Manual
Page 127: To set polled mode (menu 09, feature 01) -9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Set polled mode
CUSTOM FEATURES AND SETTINGS
This feature must be set for a polling operation and allows you
to determine which, if any, terminal can poll your terminal. The
polled mode feature has the following three selections.
FREE-
SECURE
OFF-
Any G3 terminal can poll your terminal. A password
is not required for polling.
The password must match the last four digits of the
remote terminal identification number.
No remote terminal can poll your terminal.
To set polled mode (Menu 09, Feature 01)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10
SELECT/ENTER
2. Press [0], [9] to select menu 9.
9.USER SETTINGS
01-10
SELECT/ENTER
3. Press [Enter] to select SET POLLED MODE.
l.SET POLLED MODE
01-21
SELECT/ENTER
4. Press [Enter].
POLLED MODE:
FREE
SELECT/ENTER
5. Press [Select] to select FREE, SECURE or OFF.
POLLED MODE:
SECURE
SELECT/ENTER
B
6. Press [Enter]. If you choose the polled setting SECURE, use
the terminal keypad to enter the password.
SET PASSWORD
PASSWORD:
poo
7. Press [Enter].
SET POLLED MODE
COMPLETED
TELECOPIER 7024 USER HANDBOOK
7-9