Tones, One beep, Two beeps – Xerox 7024 User Manual
Page 40: Multiple beeps, Tones -20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARING THE MACHINE FOR OPERATION
Tones
Your terminal generates audible tones to indicate terminal
status. The tones also indicate the acceptance of actions you
perform on the control panel.
One beep
A single beep indicates a valid action as been accepted when a
control panel button is pressed.
Two beeps
A double beep indicates an action has not been accepted. For
example when an incorrect sequence was performed.
Multiple beeps
More than two beeps indicate the machine requires attention.
Refer to the display for corrective action. An example would be
memory full, out of paper or voice request.
1-20
TELECOPIER 7024 USER HANDBOOK