Set second telephone, To set second telephone (menu 09, feature 10), Set second telephone -18 – Xerox 7024 User Manual
Page 38: To set second telephone (menu 09, feature 10) -18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARING THE MACHINE FOR OPERATION
Set second telephone
If desired, you can connect a second telephone to your terminal.
Follow the guidelines below for proper setting and connection.
•
Connect the second telephone to the TEL2 jack. ^
•
Select ON in the Set second telephone setting.
If you answer the incoming call using the second telephone
before the terminal answers, you can transfer the call back to the
terminal by pressing [6] two times within 12 seconds. The
terminal will perform the facsimile operation. The second
telephone must be physically connected to the terminal to
perform this operation.
To set second telephone (Menu 09, Feature 10)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10 SELECT/ENTER
2. Enter [0], [9] to select menu 09.
9. USER
SETTINGS
01-10
SELECT/ENTER
3. Press [Enter] to select the first feature within the menu.
l.SET POLLED MODE
01-21
SELECT/ENTER
4. Enter [1], [0] to select SET 2ND TELEPHONE.
10.SET 2ND TELEPHONE
01-21
SELECT/ENTER
5. Press [Enter].
REMOTE TEL:
OFF
SELECT/ENTER
6. Press [Select] to select ON or OFF and press [Enter].
REMOTE TEL:
ON
SELECT/ENTER
SET 2ND TELEPHONE
COMPLETED
1. If desired you can connect the second telephone to the TEL1 jack and the handset to the TEL2 jack.
1-18
TELECOPIER 7024 USER HANDBOOK