Xerox 7024 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DIAUING
4.
Press [Enter].
6
.
(01)=N0THING STORED
SELECT/ENTER
5. If desired number is displayed, press [Select] and go to step 7.
If NOTHING STORED is displayed, press [Enter] and go to
step 6.
If an undesired number is displayed, press [Clear] and go to
step 6.
(01)=TEL. NUMBER
Use the terminal keypad to enter the telephone number (up
to 40 characters). When the telephone number is correct,
press [Enter],
(01)=SET PARAMETERS
SELECT/ENTER
7.
If the Forced 4800 or Secure Send options are not desired,
press [Select] and go to Step 12.
If the Forced 4800 or Secure Send options are desired, press
[Enter]-
FORCED 4800:
OFF
SELECT/ENTER
8. Press [Select] to display the desired setting; ON or OFF.
9. Press [Enter] to store the setti ng.
SECURE SEND:
OFF
SELECT/ENTER
10. Press [Select] to display the desired setting; ON or OFF.
11. Press [Enter] to store the setting.
(01)=LOCATION ID
SELECT/ENTER
12. if desired name is displayed, press [Select] and go to step 15.
if LOCATION ID is displayed, press [Enter] and goto step 13.
If an undesired name is displayed, press [Clear] and go to
step 13.
TELECOPIER 7024 USER HANDBOOK
2-5