Xerox 7024 - Manual (Page 85)

SENDING
On line when sending to one remote
On line when sending to multiple remote
terminals (delayed group send,
multi-polling)
Waiting when the original is in the ADF
(waiting for a delayed send or redial):
1. Press [Stop].
1. Press [Speed Dial] and [Stop].
2. Erase the pending job in memory. [Menu], [0], [8], [Enter],
[3], [Clear]. See Erase Pending Job.
Note: If you press only the Stop key when sending to
multiple remote terminals, the current job will be stopped
but the terminal will start transmission to the next terminal.
1. Press [Stop] or remove the original from the ADF.
Waiting when no originals are in the ADF
(pending jobs are stored in memory)
1. Print out the pending job list to determine the job number.
[Menu], [0], [8], [Enter], [Start]. See Print Pending Job.
2. Erase the pending job in memory. [Menu], [0], [8], [Enter],
[3], [Clear]. See Erase Pending Job.
Erase Pending job (Menu 08, Feature 3)
This feature allows you to erase a pending job stored in memory.
You create a pending job when you program an operation to
take place at a later time.’ Print out the Pending Job List to
determine the job number you want to erase.
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10 SELECT/ENTER
2. Press [0], [8] to select menu 8.
8.PENDING JOBS
01-10 SELECT/ENTER
3. Press [Enter] to select the first feature within the menu.
1.PENDING JOB LIST
1-3
SELECT/START
4. Press [3] to select erase pending job.
3.ERASE PENDING JOB
1-3 SELECT/CLEAR
5. Press [Clear].
ERASE PENDING JOB
JOB NUMBER;
1. See Erase Polling Document to delete a job stored for polling.
TELECOPIER 7024 USER HANDBOOK 3-21