Copies (selected reduction), Copies (selected reduction) -3 – Xerox 7024 User Manual
Page 91
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
COPYING
Copies (Selected reduction)
1. Load the originals with the printed side down. Press [Select]
to select the resolution. Press [Original] to select the
contrast, if desired.
2. Press [Copy].
ENTER 0 OF COPIES
ENTER/START
3. Use the keypad to enter the number of copies.
ENTER # OF COPIES
1
ENTER/START
4. To select the reduction rate, press [Enter].
REDUCTION RATE: AUTO
SELECT/START
5. Press [Select] to cycle through the available reduction rates;
AUTO, 100%. 97%, 91 %, 81 % or 75%.
REDUCTION RATE: AUTO
(01)
SELECT/START
6. When the desired rate is displayed, press [Start].
B
COPYING
Note: If the memory overflows, an alarm will sound and a
message will be displayed.
•
Pressing [Enter] will store the originals scanned before the
memory overflowed.
•
Pressing [Clear] or [Stop] will delete all the stored originals.
•
Doing nothing for one minute will store the originals
scanned before the memory overflowed and begin copying.
Any partial page will be deleted.
TELECOPIER 7024 USER HANDBOOK
4-3