Secure send mode, To set secure send mode (menu 01, feature 2), Secure send mode -3 – Xerox 7024 User Manual
Page 67: To set secure send mode (menu 01, feature 2) -3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SENDING
Secure send mode
The Secure send feature has two selections: OFF or ON.
When ON is selected, originals will only be sent to a G3 terminal
with an identification number that matches the last four digits of
the number dialled. If the number does not match the number
you dialled, the transmission will be canceled.
When OFF is selected, all send operations will transmit normally.
To transmit originals in the secure send mode, the remote
terminal must be dialled using the terminal keypad, one touch or
speed dial.
The secure send feature deactivates after each transmission.
To set secure send mode (Menu 01, Feature 2)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10
SÊLECT/ENTER
2. Press [Enter]
l.LONG ORIGINAL MODE
1-3
SELECT/ENTER
3. Press [2].
2.SECURE SEND MODE
1-3
SELECT/ENTER
4. Press [Enter].
SECURE SEND:
OFF
SELECT/ENTER
5. Press [Select] to select ON or OFF.
SECURE SEND:
ON
SELECT/ENTER
6. Press [Enter]. 1
SECURE SEND MODE
COMPLETED
7. Refer to the desired send procedure.
1, The 7024 does not transmit secure originals to a G2 terminal.
TELECOPIER 7024 USER HANDBOOK
3-3