To program keys (pi -p6) for delayed send, To program keys (p1-p6) for delayed send -12 – Xerox 7024 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DIALUNG
To program keys (PI -P6) for delayed send
Note: Steps 1 through 7 appear on pages 2-iO and 2~11. For an
explanation of delayed send, see section 3, Sending.
8. Press [Enter] to select DELAYED SEND.
ENTER=USE MEMORY
SELECT/ENTER
If you want the transmission to be from memory, press
[Enter], Transmitting from memory leaves the ADF free for
other transmissions.
If you want the transmission to be from the ADF, press
[Select]. A delayed send job from the ADF ties up the ADF
until the operation Is completed and will be canceled if the
original is removed from the ADF.
DELAYED SEND
NUMBER OF PAGES:
10. For an automatic page count, press [Enter].
Note: If desired, use the keypad to enter the exact number of
pages in your document, including the cover page, before
pressing [Enter]. The terminal compares this number to the
number of pages transmitted.
DELAYED SEND
ENTER FAX NUMBER
11. Use the terminal keypad, one-touch key or speed dial key to
enter the telephone number. Press [Clear] to erase a
character.
DELAYED SEND
555-4545
12. When the telephone number is entered, press [Enter].
DELAYED SEND
START TIME:
14:50
13. if you do not want a specific start time, press [Enter].
If you want a specific start time, enter the desired time in 24
hour format.
•
Enter the hour and press [Enter].
•
Enter the desired mi ñutes and press [Enter].
DELAYED SEND
COMPLETED
2-12
TELECOPIER 7024 USER HANDBOOK