Menu table, Example: to select from the menu table, Menu table -6 – Xerox 7024 User Manual
Page 26: Example: to select from the menu table -6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARING THE MACHINE FOR OPERATION
Menu table
The terminal has 11 menus with additional functions (features,
reports, data entry and options.) Each menu may have several
selectable features. The 11 menus are:
1. Send Options 1
7. Print Reports
2. Send Options2
8. Pending Jobs
3.
Polling Options
9. User Settings
4.
Call Response
10. Program One-Touch
5. One-Touch Setup
11. RS-2321
6. Speed Dial Setup
To select the desired menu, press [Menu] and use the keypad to
enter the two digit menu number (01-11). When the desired
menu is displayed, press [Enter] to display the first feature in the
selected menu. To select the desired feature, use the keypad to
enter the two digit feature number. See Menu table for feature
numbers. (Numbers 1-9 must be preceded by 0, i.e. 01,02.)
Example: To select from the menu table
1. Press [Menu] to enter the menu table.
l.SEND OPTIONSl
01-10
SELECT/ENTER
2. Enter the desired menu number (01-11.) Press [0], [9] to
select menu 9.USER SETTINGS in this example.
9.USER SETTINGS
01-10
SELECT/ENTER
3. Press [Enter] to select the first feature within menu 9.
l.SET POLLED MODE
01-21
SELECT/ENTER
Enter the number associated with the desired feature within
menu 9. For example, press [0], [7] to select 7.SET CONTRAST.
7.SET CONTRAST
01-21
SELECT/ENTER
Note: You can manually advance through the menus by
pressing [Menu] one time and [Select] repeatedly until the
desired menu is displayed. You can manually advance through
the features by pressing [Select] repeatedly; or manually step
backward through the menus and features by pressing [Menu]
repeatedly.
1. Menu 11, RS-232, will be displayed only If you have a RS-232 interface board installed in your terminal.
1-6
TELECOPIER 7024 USER HANDBOOK