Voice request, To signal a voice request, To answer a voice request – Xerox 7024 User Manual
Page 80: Voice request -16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SENDING
Voice Request
The voice request feature allows you to send a voice request tone
to a remote operator. You can also be signaled by the remote
operator if that person wants to establish voice contact.
Both users must perform the appropriate actions to establish
voice request. If either user fails to answer when the voice
request sounds, the call will disconnect.
To signal a voice request
1. Press [Voice Request] during the operation.
VOICE REQUEST
STD
NORM
2. When the remote operator responds, your terminal will emit
a voice request tone.
3. Lift the handset and press [Voice Request] to switch the line
over to the handset.
4. Talk to the remote operator and then replace the handset.
To answer a voice request
1. Your terminal will emit a voice request tone.
2. To answer the voice request, lift the handset and press [Voice
Request] to switch the line over to the handset.
VOICE REQUEST
STD
NORM
3. Talk to the remote operator and then replace the handset.
3-16
TELECOPIER 7024 USER HANDBOOK