Sending, Selecting contrast and resolution, Resolution settings – Xerox 7024 User Manual
Page 65: Contrast settings, Selecting contrast and resolution -1, Resolution settings -1, Contrast settings -1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending
Selecting contrast and resolution
The terminal has five resolution and three contrast settings.
Press [Resolution] and [Original] to cycle through the available
resolution and contrast settings to select the appropriate setting
for your original.
The settings will return to the default settings after the
operation- The default setting for resolution is Standard. The
default setting for contrast is Normal.
Refer to the Custom Features and Settings section for
instructions to change the resolution and contrast default
settings.
Resolution settings
Press [Resolution] to select the appropriate setting for your
original.
•
Standard - Select Standard when sending originals with
normal detail size print.
•
Fine - Select Fine when sending originals with fine detail such
as small print.
•
Super Fine - Select Super Fine when sending originals with
small detail with complex images.
•
Halftone - Select Halftone when scanning pictures or other
originals with intermediate shades of gray.
•
G2 - Select G2 when sending in Group 2 mode.
Contrast settings
Press [Original] to select the appropriate setting for your
original.
•
Normal: Select Normal when scanning originals with normal
contrast.
•
Dark:
Select Dark when scanning originals with faint
characters.
•
Light:
Select Light when scanning originals with colored
backgrounds.
TELECOPIER 7024 USER HANDBOOK
3-1