Set number of rings, To set number of rings (menu 09, feature 09), Set number of rings -8 – Xerox 7024 User Manual
Page 126: To set number of rings (menu 09, feature 09) -8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CUSTOM FEATURES AND SETTINGS
Set number of rings
This setting determines the number of rings that will occur
before the terminal automatically answers the telephone. This
feature has five selections: 2, 3, 4, 5, or 6. The terminal is set
initially to answer after two rings.
If the manual receive mode is selected, this feature is ignored.
To set number of rings (Menu 09, Feature 09)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10 SELECT/ENTER
2. Press [0], [9] to select menu 9.
9.USER SETTINGS
01-10
SELECT/ENTER
3. Press [Enter] to select the first feature within the menu.
l.SET POLLED MODE
01-21
SELECT/ENTER
4. Press [0], [9] to select SET NUMBER OF RINGS.
9.SET NUMBER RINGS
01-21
SELECT/ENTER
5. Press [Enter]. Use the keypad to enter the number of desired
rings. Press [Clear] to erase an entry.
SET NUMBER RINGS
NUMBER OF RINGS:2
6. Press [Enter] to record the desired setting.
SET NUMBER RINGS
COMPLETED
7-8
TELECOPIER 7024 USER HANDBOOK