Set time pause, To set number of seconds (menu 09, feature 08), Set time pause -19 – Xerox 7024 User Manual
Page 137: To set number of seconds (menu 09, feature 08) -19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CUSTOM FEATURES AND SETTINGS
Set time pause
This feature allows you to set the number of seconds (from 05 to
99) the terminal should wait before dialling the next digit when
it encounters a dialling pause. The pause key allows you to insert
dialling pauses into the numbers stored in your speed dial or one
touch dial telephone numbers. An example would be when
dialling 9 for an outside line or when using charge code
numbers.
The default setting is 5.
To set number of seconds (Menu 09, Feature 08)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10
SELECT/ENTER
2. Press [0], [9] to select menu 9.
9.USER SETTINGS
01-10
SELECT/ENTER
3. Press [Enter] to select the first feature within the menu.
l.SET POLLED MODE
01-21
SELECT/ENTER
4. Press [0], [8] to select SET TIME PAUSE.
8.SET TIME PAUSE
01-21
SELECT/ENTER
5. Press [Enter]. Use the terminal keypad to enter the number
of seconds delay desired. You can select a pause from 05 to
99 seconds. Press [Clear] to erase an entry.
SET TIME PAUSE
PAUSE DURATION: 10
B
6. Press [Enter] to record setti ng.
SET TIME PAUSE
COMPLETED
TELECOPIER 7024 USER HANDBOOK
7-19