Xerox 7024 - Manual (Page 49)

DIALLING
17. When you have selected all the group numbers, press [Enter].
SPEED DIAL 01 TO 55
SELECT AND PRESS
18. Select the next speed dial number or press [Stop] to return to
the idle mode.
To set one touch keys P1-P6 as standard one touch
(Menu 10, Feature 1)
This feature allows six of the one touch keys, PI through P6, to
be used as standard one touch keys and as special program keys
to reduce multi-step operations to a single keystroke. Each key
can be programmed for both functions.
Use the procedures below to set one touch keys, PI through P6,
as standard one touch keys. The procedures to program one
touch keys to reduce multi-step operations are on the following
pages.
1. Press [Menu].
l.SENO OPTIONSl
01-10 SELECT/ENTER
2. Press[1],[0], [Enter].
1.ENTER ONE-TOUCH
1-2
SELECT/ENTER
3. Press [Enter].
PROGRAM KEY PI TO P6
SELECT AND PRESS
4. Press the desired program one touch key [P1-P6]. The
following will be displayed if no number is entered.
[P1]=N0THING STORED
SELECT/ENTER
If desired number is displayed, press [Select] and go to step 7.
If NOTHING STORED is displayed, press [Enter] and go to
step 6.
If an undesired number is displayed, press [Clear] and go to
step 6.
[P1]=TEL. NUMBER
TELECOPIER 7024 USER HANDBOOK 2-7