Replacing the imaging film, Replacing the imaging film -8 – Xerox 7024 User Manual
Page 146
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
PROBLEM SOLVING
Replacing the imaging film
Low imaging film on the imaging cartridge is indicated by a
green indicator on the terminal or by a message on the display.
1. Press down on the printer cover release button and open the
printer cover.
2. Locate the imaging cartridge. Note: the red spindle is on the
right rear side. Grasp the cartridge by its handles and lift it
out of the term i na I.
Set the cartridge down on a work surface and turn it over.
Make sure the blue spindle is on the right rear side.
Blue Spindle
8-8
TELECOPIER 702A USER HANDBOOK
Advertising