Xerox 7024 - Manual (Page 50)

DIALLING
Use the terminal keypad to enter the telephone number (up
to 40 characters). When the telephone number is entered,
press [Enter],
[P1]=SET PARAMETERS
SELECT/ENTER
If the Forced 4800 or Secure Send options are not desired,
press [Select] and go to step 12.
If the Forced 4800 or Secure Send options are desired, press
[Enter].
FORCED 4800: OFF
SELECT/ENTER
8. Press [Select] to display the desired setting; ON or OFF.
9. Press [Enter] to store the setting.
SECURE SEND: OFF
SELECT/ENTER
10. Press [Select] to display the desired setting; ON or OFF.
11. Press [Enter] to store the setting.
[P1]=L0CATI0N ID
SELECT/ENTER
12. If desired name is displayed, press [Select] and go to step 15.
If LOCATION ID is displayed, press [Enter] and go to step 13.
If an undesired name is displayed, press [Clear] and go to
step 13.
Note: The two digit number in the display represents the
number of characters entered.
ABCDEFGHIJ. 00
2-8 TELECOPIER 7024 USER HANDBOOK