Store for polling, To set store for polling (menu 03, features 3,1), Store for pol i i ng -18 – Xerox 7024 User Manual
Page 82
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SENDING
Store for polling
This feature enables your terminal to perform a send operation
when initiated (polled) by a remote terminal. Polling mode must
be set to FREE or SECURE in the Set Polled Mode for a polling
operation. See Set Polled Mode in Custom Features and Settings.
If SECURE is selected in Set Polled Mode, polling op>erations are
protected with a password. The password must match the last
IFour digits of the remote terminal identification number.
A document can be stored in internal memory or placed in the
ADF to be retrieved by a remote terminal. If the document is
stored in memory, it can be printed for review at any time
without erasing it from memory. See Print Polling Doc. The
terminal also includes a command to delete a document stored
in memory for polling. See Erase Polling Doc.
To set store for polling (Menu 03, Features 3,1)
1. Load the originals in the ADF with the printed side down.
Press [Select] to select the resolution. Press [Original] to
select the contrast, if desired.
2. Press [Menu].
l.SEND OPTIONSI
01-10 SELECT/ENTER
3. Press [0], [3].
3.POLLING OPTIONS
01-10 SELECT/ENTER
4. Press [Enter],
1.DELAYED POLLING
1-3
SELECT/ENTER
5. Press [3].
3.STORE FOR POLLING
1-3
SELECT/ENTER
6. Press [Enter].
1.STORE FOR POLLING
1-3
SELECT/ENTER
3-18
TELECOPIER 7024 USER HANDBOOK