Installing the trays – Xerox 7024 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
INSTALLATION
Installing the trays
1. Document input tray - Position the tabs on the tray over the
slots located on top of the terminal. Press the tray down
firmly to secure.
2. Output tray extension (attached to the terminal) - Lift the
tray upward until the tray locks into place. To fold the tray
back into the term Inal, lift and lower slowly.
3. Document output tray-Position the tray vertically. Insert the
tabs into the slots and lower the tray into position.
XIV
TELECOPIER 7024 USER HANDBOOK
Advertising