Receiving a document, Receiving, To manually receive a document – Xerox 7024 User Manual
Page 93: To automatically receive a document, Receiving a document -1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiving a document
Receiving
The terminal should have a supply of paper before receiving
documents from other facsimile terminals. Reference Answering
Modes in Section 1, Preparing the machine for operation, for a
description of each of the answering modes.
The terminal will automatically receive the documents into
memory if supplies run out or a paper jam occurs. See Memory.
Under other conditions, the document will first be received to
memory and printed automatically.
Voice request can be used to notify the remote user that voice
contact is desired after the transmission.
To manually receive a document
1. Press [Manual Receive] until the LED is on and remove any
originals from the ADF.
LOAD ORIGINALS
SEP 30'9t
10:55
2. When the telephone rings, lift the handset. If documents are
in the ADF, remove them.
TELEPHONE
3. Press the [Start] key when you hear the fax tones indicating
the remote terminal Is ready to send and hang up the
handset.
RECEIVE
STD
4. The terminal will receive and print the incoming document.
To automatically receive a document__________________
1. Press [Manual Receive] until the LED goes out and following
displays:
LOAD ORIGINALS
SEP 30'91
10:55
TELECOPIER 7024 USER HANDBOOK
5-1