Answering modes, Answering modes -15 – Xerox 7024 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARING THE MACHINE FOR OPERATION
Answering modes
There are two basic ways your terminal answers incoming calls;
automatic or manual. There is one manual answer mode and
three automatic answer modes.
Press [Manual Receive] repeatedly until the desired setting is
displayed.
Automatic modes:
•
LOAD ORIGINALS - LED is off- Select this setting when you
want the terminal to automatically answer all incoming calls
after the specified number of rings. (See Set number of
rings.)
•
LOAD ORIG:(TEL) - Select this setting when you want your
terminal to automatically answer all incoming calls and play
a prerecorded message to all voice callers if no facsimile
tones are detected.
If facsimile tones are detected, your terminal will perform
any facsimile operation.
•
LOAD ORIG:(ANS) - Select this setting when you connect an
answering machine to your terminal. (See Set answering
machine.) With proper setup, the answering machine will
automatically answer the incoming call. If the answering
machine is turned off, your terminal will automatically
answer the call after 7 rings.
Any voice callers to your terminal will hear the prerecorded
message on your answering machine. If facsimile tones are
detected, your terminal will perform any facsimile operation.
Manual mode:
•
LOAD ORIGINALS - LED is on. Select this setting when you
want to manually answer all incoming calls.
telecopier
7024 USER HANDBOOK
1-15