Set auto receive time, Custom featuresand settings, To set auto receive time (menu 09, feature 02) – Xerox 7024 User Manual
Page 119: Set auto receive time -1, To set auto receive time (menu 09, feature 02) -1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Set auto receive time
TELECOPIER 7024 USER HANDBOOK
Custom Featuresand Settings
The auto receive feature allows selection of specific hours for the
terminal to switch to and from automatic answer mode. This
feature is allowed only when the answering mode is set to LOAD
ORIGINALS with the LED off. The default for this setting is 00.
To set auto receive time (Menu 09, Feature 02)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10
SELECT/ENTER
2. Press lO], [9] to select menu 9.
9. USER SETTINGS
01-10
SELECT/ENTER
3. Press [Enter] to select the first feature within the menu.
l.SET POLLED MODE
01-21
SELECT/ENTER
4. Press [0], [2] to select AUTO RECEIVE TIME.
2.SET AUTO RCV. TIME
01-21
SELECT/ENTER
5. Press [Enter] and enter the hour automatic reception is to
begin. The time must be entered in 24 hour format.
SET AUTO RCV.
TIME
START TIME:
18:00
B
6. Press [Enter] and enter the minute automatic reception is to
begin.
SET AUTO RCV.
TIME
START TIME:
18:30
7. Press [Enter] to record the start time.
SET AUTO RCV. TIME
END TIME:
00:00
8. Enter the hour you want automatic reception to end.
SET AUTO RCV. TIME
END TIME:
20:00
7-1