To enter pauses in one touch or speed dial numbers, To set one touch keys 01-24 (menu 05, feature 1) – Xerox 7024 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DIALUNG
To enter pauses in one touch or speed dial numbers
A pause may be included anywhere in the one touch or speed
dial numbers by pressing the pause or dash key.
A pause should be entered whenever a delay is required
between numbers such as when dialling 9 for an outside line or
using charge code numbers.
The dash key should be used for an undetermined delay
between numbers such as waiting for a dial tone when dialling
through a PBX system.
If Pause is pressed, displays.
If dash [ - ] is pressed twice, "!" displays.
To set one touch keys 01-24 (Menu 05, Feature 1)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10
SELECT/ENTER
2. Press [0], [5], [Enter].
ONE-TOUCH 01 TO 24
SELECT AND PRESS
3. Press the desired one touch key.
(;01]=NOTHING STORED
SELECT/ENTER
If desired number is displayed, press [Select] and go to step 6.
If NOTHING STORED is displayed, press [Enter] and go to
step 5.
If an undesired number is displayed, press [Clear] and go to
step 5.
[01]=TEL. NUMBER
5. Use the terminal keypad to enter the telephone number (up
to 40 characters). When the telephone number is correct,
press [Enter].
[01]=SET PARAMETERS
SELECT/ENTER
6. If the Forced 4800 or Secure Send options are not desired,
press [Select] and go to Step 11.
If the Forced 4800 or Secure Send options are desired, press
[Enter].
FORCED 4800:
OFF
SELECT/ENTER
2-2
TELECOPIER 7024 USER HANDBOOK