Talkswitch CT.TS005.001101.UK - Manual (Page 112)

1 0 4 T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D
At the Local Extension dial tone or at the Auto Attendant, dial to enter
command mode and enter a password (if required). Dial any of the following
Quick Commands and press the sign.
Automatic Mode Switching using the Time Scheduler
Use the configuration software to activate TalkSwitch’s Time Scheduler
feature. You can configure TalkSwitch to switch between Modes automatically
by configuring the times for Mode changes in the ‘Modes’ window under Call
Handling in the configuration software.
If you switch modes manually, TalkSwitch automatically switches to the
proper mode during the next scheduled mode change.
3.7 OUT OF THE OFFICE — MAKING CALLS WITH
CALL BACK AND DISA (CALL BRIDGE)
Working together, Call Back and Call Bridge act as your personal long distance
operator. Whether you are across town or around the world, these two
features allow you to place calls from your office telephone line(s).
3.7.1 Using (Call Bridge)
Call Bridge allows you to place calls using your office telephone lines when
you are not in the office. You can make a call to TalkSwitch, access a
telephone line connected to TalkSwitch and enter the number you want to
dial. This is especially useful when you are out of the office with your cell
phone and need to dial a long-distance number. To avoid long-distance cell
rates, all you need to do is make the local call to TalkSwitch to access Call
Bridge and make the long-distance call, accessing your office savings plan.
How to use DISA (Call Bridge)
Dial into one of TalkSwitch’s Lines. When the Auto Attendant answers, select
a Hunt Group (81 – 88 or 9) or Same Line Connect (80). You are then asked to
supply your Account password to receive dial tone. If you are using Same
Line Connect (80) and your line supports the 3-Way Calling/Conference
service, you are prompted to enter the phone number.
When you have completed your call (or if the telephone number dialed was
busy), do one of the following:
Activate Mode 1: 3 1
Activate Mode 2: 3 2
Check Current Mode: 3 0
#
#