Talkswitch CT.TS005.001101.UK - Manual (Page 28)

2 0 T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D
2.3.3.2 IP Configuration
Configure TalkSwitch IP settings:
Click on System information (to expand)
Click IP Configuration.
The Radio button “Obtain IP and DNS information automatically” is selected.
Note: An administrator password must be set to avoid unauthorized
access to system configuration, including external access to system
commands.
Location Settings
Subject to the system model, a Location field may display in the System
Information Administrator screen. If the field is shown, set it to the
country where the system is being used. If different service providers are
identified for the country, select the service provider to which the system’s
telephone lines will be connected. Note that setting or resetting this
parameter will change the system setting to the default values required for
the country or service provider. The Location setting is shown in the
bottom right hand corner of all configuration folder windows. If the
Location field is not available on the Administrator page, the system is
preconfigured for the location shown in the bottom right hand corner of
the window.
This section applies to models with a LAN port when VoIP or remote
configuration will be used. There are two methods of configuring the IP
settings: automatic and manual.