Talkswitch CT.TS005.001101.UK - Manual (Page 40)

3 2 T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D
Phone numbers 250-299 have special functionality with TalkSwitch. These
numbers can be dialed directly from any extension or Auto Attendant and
are routed automatically via VoIP to the destination with the number
assigned to one of its ports. Part of the role of an administrator is to keep
track of all phone numbers assigned to each location to prevent duplicate
numbers in multiple locations. We recommend that you use these numbers as
it will facilitate calling from extensions and the Auto Attendants.
In the “Service Provider Profile” section
All VoIP numbers are active when the system is first configured. Phone
numbers need to be entered exactly as provided by the Service Provider. For
the United States and Canada, the Country code is 1. Enter the area code and
phone number.
Enter a Username and Password. Every phone number has a unique Username
and Password.
2.3.3.6 Line Hunt Groups
There are a total of 9 Line Hunt Groups that control outbound call line
selections. These Line Hunt Groups are used by the Local and Remote
Extensions and the DISA feature. Each Hunt Group can support several line
choices and attempt to use an available line in the order that they are listed
(Lines to Hunt) for that Hunt Group. These settings have no effect on
incoming calls.
Default setup:
Select a Line Hunt Group and enter a unique name to identify this Hunt
Group elsewhere in the configuration software.
Under ‘Set Line Hunt Group’, select the Line Type. If you wish to use this
Hunt Group to access telephone lines, select ‘Phone Lines’. To use this Hunt
Group to access VoIP numbers, select ‘VoIP numbers’.
Hunt Group 9: selects any available telephone line
Hunt Group 81: selects telephone Line 1
Hunt Group 82: selects telephone Line 2
Hunt Group 83: selects telephone Line 3
Hunt Group 84: selects telephone Line 4
Hunt Group 88: selects any available VoIP number (only applies
to units with VoIP trunks)