Talkswitch CT.TS005.001101.UK - Manual (Page 90)

8 2 T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D
Internal Caller ID options
TalkSwitch can generate name and number Caller ID to each extension during
intercom calls. If your Caller ID unit/telephone does not support the name
option, choose to have TalkSwitch send the number only.
Audio Output Options
TalkSwitch can output different audio to the PA port. The default setting is
to play only PA announcements through the PA port by dialing
0 from
any extension.
Other options include Voicemail Screening, useful in a home environment,
Demo with a router, used for demonstrating the product and Static VoIP
Demo, used strictly for demonstrating two TalkSwitch units connected to a
hub or a switch and acting as two separate locations.
Auto Attendant Transfer Prompts
TalkSwitch can disable playing of transfer prompts to callers when redirecting
calls from the Auto Attendant.
2.3.7.4 Troubleshooting
Do not change the following controls unless you are familiar with the effect
they have on the TalkSwitch operation. If your system does not appear to be
functioning properly, please contact your dealer for assistance.
Recall (Flash) Lengths
Recall or Flash is a timed disconnect of the telephone line to signal the
PBX, or telephone network. The timing of the duration of the signal is
dependent on normal practise of the country or telephone company. The
location field on the System-Information and Administration folder will
*