Talkswitch CT.TS005.001101.UK - Manual (Page 153)

A P P E N D I X C 1 4 5
Touch-tone features dialed at the Auto Attendant message from outside
phones
Note: If you have Direct Line Access enabled at your Local Extension,
then you must first press ‘recall’ before using most of the functions listed.
Digit dialed Function performed
0 User Defined — An Extension, Ring Group, Auto
Attendant, Voice mailbox, Announcement or per-
form no action.
1x1-1x4
1x1-1x8 Dials Local Extensions. x represents the Unit ID
number.
2x1-2x8 Dials Remote Extensions associated with an exter-
nal phone number. x represents the Unit ID num-
ber (1-4).
250-299 Speed dial for VoIP calls. TalkSwitch will hunt the
VoIP ports, go off hook, then dial the digits
entered.
300-309 Dials Extension Ring Groups — 10 in total for the
entire
system. Mapped to Local Extension(s), with spe-
cific fall through options.
1,2,3,4,5 User Defined — An extension, Ring Group, Auto
Attendant, Voice mailbox, Announcement or Per-
form no action.
6 Enters Call Back configuration.
7(xxx...) PBX Transfer — A recall hook transfer with dis-
connect after dialed. Usually used only in systems
connected to another PBX.
81-88, 9 “Line Hunt Group access code for DISA for —
password protected at the Auto Attendant.
80 DISA using Same Line Connect. Requires 3-Way
Calling/Conference on the line.