Talkswitch CT.TS005.001101.UK - Manual (Page 37)

T A L K S W I T C H C O N F I G U R A T I O N 2 9
In the “Phone numbers” section
In the “Telephone company services” section
Click on Activate Line to enable the telephone line port. Enter the normal
telephone number for the telephone line as the Main Number.
If your are using a Distinctive Ringing service for alternative telephone
numbers from your telephone service provider check either Distinctive Ring
1 or Distinctive Ring 2 as required and enter the matching telephone
numbers. When incoming calls are detected with these distinctive ringing
patterns they will be handled as separate telephone lines and can be setup
with different call handling (e.g. routed to a FAX machine at specific
extension).
The distinctive ringing patterns are as follows:
Distinctive Ring 1 Two ring bursts per cycle of ringing (where normal
ringing is a single ring burst per cycle); OR a single
ring burst per cycle of ringing (where normal ringing
is two ring bursts per cycle of ringing)
Distinctive Ring 2 Three ring bursts per cycle of ringing
Select any of the telephone company services that have been activated on
the telephone line. See Appendix B for details of compatibility with
telephone company services.