Talkswitch CT.TS005.001101.UK - Manual (Page 44)

3 6 T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D
• Select the desired Action (route to a specified line hunt group or block
calls) from the corresponding pull-down list.
Example:
Note: The entries that you specify for ARS match the dialed digits with
the longest leading digits entry. If the numbers dialed match the digits
that you specified in table shown above, the call is routed to a line hunt
group or blocked according to the Action you selected.
• If you dial ‘9’ followed by a phone number that does not start with ‘1’,
‘01’ or ‘01161’, you access an outside line. The number is automatically
routed according to the configuration of line hunt group 9.
• If you dial ‘9’ followed by ‘1’, a 3-digit area code and
a 7-digit number, you access a line for long-distance calls in North
America, as defined in line hunt group 82.
• If you dial ‘9’ followed by ‘01’, the call is blocked. At the extension, you
hear a prompt stating "You are not permitted to dial this number" and
then a normal dialtone.
• If you dial ‘9’ followed by ‘01161’, an area code and a phone number,
you access a line for calls to Australia, as defined in line hunt group 83.