Talkswitch CT.TS005.001101.UK - Manual (Page 81)

T A L K S W I T C H C O N F I G U R A T I O N 7 3
Allow DISA (Call Bridge):
To allow DISA (Call Bridge) after a Call Back has been accepted, check the
Allow Call Bridge box. You may also restrict the Call Bridge line access by
selecting the Hunt Group Access button. By default, Call Bridge is enabled
when Call Back is activated. You will not be prompted for another
password when you select a Hunt Group at the Auto Attendant.
2.3.6.2 Prompted Call Back
If you are travelling to a location where you do not yet know the phone
number, you can use Prompted Call Back to save on your long distance
charges. For details on using Call Back, see section 3.7.2.
Note: There are 4 Auto Call Back accounts per TalkSwitch unit. If you
need to record an Announced Message for a particular Auto Call Back
account, it must be on the same TalkSwitch unit as the account.
Note: If you need to configure and/or record an Announced Message from
a remote location and do not have the Auto Attendant set up to answer
this Call Back line, you can call your Call Back number and let it ring 15
times. A generic Auto Attendant will answer and you can configure Call
Back by pressing 6.
Note: For a 2 second pause, dial 0 and for a , dial .
When you have completed the entire dial string, press .
* # * #
#