Talkswitch CT.TS005.001101.UK - Manual (Page 68)

6 0 T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D
Erase Instructions (button)
Click this button to display a dialog box showing the instructions on how to
erase an Auto Attendant using a telephone. It is a good idea to erase unused
Auto Attendants. They share the memory with voicemail.
View Auto Attendant Time Usage
To view the amount of time used by
all Auto Attendants, go to the main
menu Tools -> Memory Usage
-> Auto Attendant.
You may have unused Auto Attendant
messages. Delete them to free up
memory.
2.3.5.3 PSTN analogue telephone Lines
This section describes how TalkSwitch handles incoming calls based on the
incoming line and ring cadence (distinctive ring numbers).
On an incoming call during mode 1 or 2
Select a line to configure and select Mode 1 or Mode 2 where you want
TalkSwitch to use these settings. If you entered the phone number in the
Telephone Lines section under System Information, the number displays on
the corresponding button.
Note: With the use of a memory
card, you can extend the time for
voicemail and Auto Attendant
recordings to up to 9 hours.