Talkswitch CT.TS005.001101.UK - Manual (Page 18)

1 0 T A L K S W I T C H U S E R G U I D E • U K & I RE L A N D
1.5.3 Changing the Unit ID
To change the Unit ID, the configuration software must be closed!
Press from a Local Extension to enter command mode.
Enter a password if necessary and dial 0 0 .
The system responds with the Unit ID of that particular TalkSwitch. In
command mode, use any of the following commands:
1.5.4 How unit IDs affect system extension numbers
When more than one TalkSwitch is connected to a LAN in networked mode,
the extensions and voicemail have different numbers based on the Unit ID
assigned to the TalkSwitch unit they belong to.
The extensions and voice mailboxes affected by the new numbering system
are listed in the table below.
None of the Extension Ring Groups are affected They are global to the entire
system. It doesn’t matter if there are one or four TalkSwitch units on a LAN,
Unit ID Touch Tone Command
1
01
2
02
3
03
4
04
Unit ID 1 Unit ID 2 Unit ID 3 Unit ID 4
Local
Extensions 111-118 121-128 131-138 141-148
Remote
Extensions 211-218 221-228 231-238 241-248
Local
Mailboxes 111-118 121-128 131-138 141-148
Remote
Mailboxes 211-218 221-228 231-238 241-248
General
Mailboxes 410-419 420-429 430-439 440-449
#
#
#
#
#
#