Talkswitch CT.TS005.001101.UK - Manual (Page 3)

T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D
Thank you for purchasing the TalkSwitch Phone System. This user guide
provides instructions for installing, configuring and using your TalkSwitch.
Please read this section before you start installing the product.
Important Safety Information
Power & Lightning Surges
Surge protection devices are recommended in areas where lightning or power
surges are likely to occur. Avoid using corded telephones during a lightning
storm. There may be a risk of electric shock. Do not install a TalkSwitch
system during an electrical storm.
If your TalkSwitch was supplied with
telephone line lightning surge protectors to met local regulatory
requirements, please install the devices in accordance with the instructions
provided.
Power Adaptor & Power Cords
Use the power adaptor and power cords provided with the TalkSwitch. Other
power adaptors may damage the unit. Check that the power adaptor voltage
rating matches the local supply. If they do not match, please contact your
TalkSwitch reseller for advice.
Temperature & Environment
Operate TalkSwitch in a location where the temperature is between 0°C and
40°C.
• Do not expose it to a heat source or direct sunlight and avoid damp,
dusty locations.
• Do not expose it to vibration, hazardous chemicals or explosives.
• Do not locate the TalkSwitch unit where it is subjected to electrical noise
generating devices such as motors, fluorescent lamps or radio
transmitting devices.
• Do not stack TalkSwitch units directly on top of each other.
P RE F A CE